Moving day in Swindon usually ends with boxes in every room, a kettle found by luck, and a bunch of keys handed over by someone you met once. What nobody hands over is a list of who else has a copy. That's why changing the locks belongs near the top of your new-home list, not "one day when we get round to it".

Who might still have a key?

When you buy or rent a home, you can't know how many copies of the keys are out there. Previous owners, family members, cleaners, dog walkers, builders and neighbours may all have had one at some point. Most of them are perfectly honest people. But you don't know them, and you don't know where their copy is now.

Changing the cylinder means the only working keys are the ones you've just been given.

It's usually just the cylinder

Most uPVC and composite doors in Swindon homes use a multipoint lock: a long mechanism inside the door that throws hooks, bolts or rollers into the frame. The part with the keyhole is a separate euro cylinder, held in by one long retaining screw in the edge of the door.

If the mechanism works smoothly, there's typically no need to touch it. Swapping the cylinder changes which keys work, and the rest of the lock stays as it is. If the handle is floppy, or the lock grinds even with the door open, that's a sign the mechanism needs looking at too, and it's worth mentioning when you book.

Pick the right cylinder

  • Size matters. Cylinders are measured from the centre of the retaining screw to each end, and the two sides are often different. The new one should sit flush with the handle on the outside, not stick out.
  • Look for anti-snap ratings. Look for a BSI Kitemark with TS 007 three stars, or Sold Secure Diamond, on the cylinder.
  • Think about the inside. A thumb-turn on the inside can make it quicker to get out in an emergency, but it isn't right where someone could reach it through a letterbox or glass panel. My guide to thumb-turn locks and fire escape explains the trade-off.

If you're not sure what's on your door now, checking for an anti-snap euro cylinder walks you through it.

Do every door at once

People often change the front door and forget the rest. Include:

  1. The back door and any patio or French doors with a key cylinder
  2. A side gate or garage door with a lock
  3. Any key safe (change the code)
  4. Window lock keys, if the old ones are missing

Doing them in one visit is usually quicker than doing them one at a time over several months.

Renting?

If you rent, check your tenancy agreement and speak to your landlord before any lock is changed. Our article on whether landlords can change tenancy locks covers the basics.

How Ian works

I change uPVC and composite door cylinders as part of a booked session. A cylinder swap is typically one item on a list, so it fits alongside other new-home jobs like curtain poles, door adjustments and putting shelves up. Sessions are 3 hours in Swindon, and full-day bookings cover about 30 minutes around Swindon. I work through your list in order and will do my best to get it done in the time booked. Small bits from my van stock aren't charged; new cylinders go on the invoice at cost, and there's a limit on how much I buy in for any one customer.

For a lighter read on the same topic, see my blog post on when to change your front door lock after losing a key or moving in.

Ready to get it done? Book a session or message me on WhatsApp on 07729 689420.